Download Table 2 Astm C33 from our fatest mirrorRECENT CHANGES TO ASTM C33 STANDARD SPECIFICATIONS FOR FINE ...
6863 dl's @ 5340 KB/s
ASTM C33 Fine Aggregate Grading 6.3 Fine aggregate failing to meet these grading require- ments shall meet the requirements of this section provided that
Date added: December 1, 2013 - Views: 16
meet the requirements of Table 2 when tested in accordance with ASTM C 136. When the nominal maximum size of the aggregate is greater than one inch, furnish the aggregates in two size groups.
Date added: January 27, 2012 - Views: 150
Table 2. Comparison of ASTM C 33-87, C 33-23, and PCA Gradations..... 17 Table 3 ... 2) Some aggregate producers are fearful that the 8-18 specification cannot ... will be a combination of the 1923 C33 version plus the first issue of PCA’s
Date added: January 31, 2012 - Views: 63
SAND SPECIFICATIONS: Washed ASTM C33 Fine Aggregate Concrete Sand is utilized for stormwater management applications in Montgomery County. In addition to the ASTM C33 specification, sand must meet
Date added: September 27, 2012 - Views: 132
TABLE 2 GRADATION FOR COURSE AGGREGATE Sieve Designation (Square Openings - inches) Percentage by Weight Passing Sieves 2 ½ --2 -- ... ASTM C33 Specification for Concrete Aggregates ASTM C94 Specification for Ready-Mixed Concrete ASTM C150 Specification for Portland
Date added: February 18, 2012 - Views: 35
Section 37 – PORTLAND CEMENT CONCRETE PAVEMENT – P-501 37-2 PCC PAVEMENT P-501 3. Coarse Aggregate a) Conform to: (1) ASTM C33 (a) within separated size groups
Date added: August 16, 2014 - Views: 1
2) Gradations: Conform to Table of Borrow Aggregate Gradations. 02315-5 July 2011 . Borrow Aggregate Gradations ... (2) Or Borrow Aggregate meeting ASTM C33, coarse aggregate size number 67 for Bedding Zone. b) Pipe with greater than 10 feet cover:
Date added: March 13, 2012 - Views: 170
ASTM C33 TESTING OF COARSE AGGREGATE Client: Sierra Ready Mix. Inc. 4150 Smiley Rd. North Las Vegas. Nevada 89081 Attn: Brandon Smilhe:r: l~~ Vf(iR~ MATE RIALS TEST! NG ... (Refer to ASTM C33 Table 3). Report By: Reviewed By:
Date added: February 1, 2012 - Views: 72
Fineness Modulus For Sand . ... For these reasons, ASTM C33 provides guidelines for gradation and FM for fine aggregates that can be used in concrete; the recommended range for FM is 2.3 to 3.1. Table 1 presents the recommended gradation limits. 1.
Date added: December 10, 2012 - Views: 17
ERDC/GSL TR-08-2 February 2008 Mechanical and Physical Properties of ASTM C33 Sand Ernest S. Berney IV and Donald M. Smith : Geotechnical and Structures Laboratory
Date added: June 19, 2014 - Views: 1
mixture gradation requirements of Table 501-2, the gradation requirements of §703-02 shall ... ASTM C33 Size Number 57 is an acceptable equivalent to the Type CA 2 gradation. ... Delivery units are subject to inspection as per NYSDOT Materials Method 9.1
Date added: December 12, 2011 - Views: 9
Table 2 shows how the physical performance of the granular media changes in response to different ... 2) Sand that meets the ASTM C-33 specification is not an ideal media. ... C33-02a Standard Specification for Concrete Aggregates. West Conshohocken, PA. p.11. Amini F. and H.V. Troung. 1998.
Date added: December 14, 2012 - Views: 8
Table 5.2. Characteristics and Tests of Aggregate. ... about what is meant by the maximum size of aggregate. ASTM C 125 and ACI 116 define this term and distinguish it from nominal maximum size of aggregate. The maxi-
Date added: December 27, 2011 - Views: 300
Table 2. Mix design ... Concrete with slag cement will have a slower rate of strength gain than concrete made ... Source 1 F-34 ASTM C33 No. 4 2.68624 Agg. Source 2 F-34 ASTM C33 No. 67 1014 2.68 Agg. Source 3 F-34 ASTM C-33 No. 8 481 2.68
Date added: October 26, 2013 - Views: 4
These BMPs are listed in the table below. Detailed information on each material requirement follows. ... per ASTM C33 or No. 89 coarse aggregate (3/8 to No. 50) per ASTM D 448. If other gradation of aggregate is to be used, ...
Date added: December 22, 2011 - Views: 30
Table 1 ASTM C 33 requirements Table 2 CSA A23.1 (FA1) requirements. Interlocking Concrete Pavement Magazine | November 2006 25 ... (2.83 in/hr) Gradation ASTM C33 CSA A23.1 (FA1) Maximum 1 % passing No. 200 (0.075 or 0.080 mm) sieve Secondary Properties
Date added: May 31, 2013 - Views: 2
ASTM C33 The vast ... Aggregates, commonly referred to as concrete sand. (See table 1) In the rec ognition that fine particles create moisture retention problems, the gradations for bedding sand specifications generally include the modification that ...
Date added: May 15, 2013 - Views: 13
2 From the sieve analysis of the fine aggregate a characteristic curve for the material and a number, known as the fineness modulus, will be obtained as described by ASTM C-33.
Date added: December 17, 2011 - Views: 32
2. Referenced Documents 2.1 ASTM Standards: C 33 Speciﬁcation for Concrete Aggregates2 ... TABLE 2 Types and Minimum Number of Specimens and Tests Num-ber of Types of Speci-mensA Num-ber of Test Ages Number of Con-ditions of Con-creteB
Date added: May 10, 2013 - Views: 22
TABLE 2 Grading Requirements for Coarse Aggregates Size Number Nominal Size (Sieves with Square Openings) Amounts Finer than Each Laboratory Sieve (Square-Openings), Mass Percent
Date added: July 2, 2013 - Views: 11
Table 7-2: Canadian Standards Association (CSA) A23.1– Gradation for Bedding Sand Sieve Size Percent Passing 10.0 mm 100 5.0 mm 95 to 100 ... For ASTM C33, ICPI recommends the additional limitations on the No. 200 (0.075 mm) sieve as shown.
Date added: November 8, 2013 - Views: 1
composition by weight shall be within Table . 702-1. TABLE 702-1. CRUSHED AGGREGATE ... The aggregate shall conform to the sieve analysis in this specification except that the least dimension ... Coarse aggregate shall conform to ASTM C33 grading size No. 57. The size and gradation of fine ...
Date added: October 22, 2013 - Views: 4
Table 1, column 2, gives internet links for the sources of all standards being proposed for adoption by reference in DEQ-4. Column 3 gives links to the free standards. ... ASTM C33-13 ASTM C33-13 AASHTO T89-10 AASHTO T89-10 AASHTO T89-10
Date added: August 1, 2013 - Views: 11
ASTM C33, Table 2. Before and during field trial mixes, the Contractor may make minor adjustments to the above gradation to produce the specified concrete. During progress of the work, variations from the specified gradations will be acceptable ...
Date added: January 29, 2012 - Views: 42
3.1.2 Aggregates: ASTM C33 or C330. ... Table 4.2 Total Air Content For Frost-Resistant Concrete Nominal Maximum Aggregate Size, in. Air Content, 0/0 * Severe Exposure Moderate Exposure 3/8 6.0 to 9.0 4.5 to 7.5 1/2 5.5 to 8.5 4.0 to 7.0
Date added: March 8, 2012 - Views: 127
uniform, properly graded aggregate materials, uniformly batched and mixed thoroughly . Concrete ... ASTM C33 which is shown in table – 2 The properties of fine aggregate or sand play a much important role in the proper training of pump able mixes.
Date added: November 30, 2012 - Views: 3
ASTM C33 2. ASTM C150 3. ASTM C31 1.5 SUBMITTALS A. Submit product data, shop drawings and Samples. 1. ... TF 3165 PT2-2 Table W Q HITE S. ON RIGHT 1 F OOTING AND FINISHED M E ATRIAL B YO E THRS C HAIR PEDESTAL T ABLE PEDESL TA T ABLE TOP PRES CAT U NIT 7 8" 2 5" 2 5"
Date added: October 17, 2013 - Views: 1
Geotextile Sand Filter module for further treatment. Width & Length The system width is the sand dimension perpendicular to the GSF module rows. The system ... See Table 1 for more information on the ASTM C33 sand and sieve specifications.
Date added: May 19, 2013 - Views: 1
ASTM C33) percent, with a provision that the fineness modulus (FM) ... reproduced below in Table 2: Table 2. ASTM C136 and AASHTO Test Sample Size and Allowable Material Retained on Sieves for Fine and Coarse Aggregates Reference Sieve Opening
Date added: February 2, 2014 - Views: 5
Table 721.1(2) 3-1.1 – 3-1.4 RATED FIRE -RESISTANCE PERIODS FOR VARIOUS WALLS AND PARTITIONS Item ... Sand, pea gravel, crushed stone, or slag meeting ASTM C33 Pumice, scoria, expanded shale, expanded clay, expanded slate, expanded slag, expanded fly ash, or cinders meeting ASTM C331
Date added: April 4, 2014 - Views: 2
Table 2. Mix design SS6012P30 ... Concrete with slag cement will have a slower rate of strength gain than concrete made with 100 percent portland cement; ... ASTM C33 No. 4 . 624 . 2.68 . Agg. Source 2 . F-34 . ASTM C33 No. 67 . 1014 . 2.68 . Agg. Source 3 . F-34 . ASTM C-33 No. 8 .
Date added: December 8, 2011 - Views: 6
Gradation in accordance with Table 2 of ASTM C33 and represented by a smooth gradation curve within the required limits. 2. Fine Aggregate: a. Washed natural sand or washed manufactured sand. ... 033000 – 2.3 PRODUCT DELIVERY, STORAGE, AND HANDLING . A. Aggregates:
Date added: August 18, 2013 - Views: 1
Table 2 has been adjusted to provide an Eljen required minimum of 5 modules per bedroom and has ... ASTM C33 Specified Sand with less than 10% passing a #100 sieve and less than 5% passing a #200 sieve shall be place below and around the GSF modules, ...
Date added: March 12, 2012 - Views: 6
2. ASTM C33, "Specification for Concrete Aggregates." 3. ... Table 4.2.1. 2. Coarse aggregate: Nominal sizes indicated below, conforming to ASTM C33, Table 2: a. 0 ... C. Water (ACI 301, 22.214.171.124): 1. ASTM C94. D. Latex Emulsion: 1.
Date added: November 4, 2011 - Views: 17
surface dry, have low absorption and high density, and comply with ASTM C33 size number 8 per Table 2. Add the pea gravel after the water and SikaGrout 328. Mixing Procedure Make sure all forming, mixing, placing, and clean-up materials are on hand.
Date added: September 16, 2013 - Views: 1
Gradations: Conform to Table of Borrow Aggregate Gradations. 02315-4 April 2009 . Borrow Aggregate Gradations ... (2) Or Borrow Aggregate meeting ASTM C33, coarse aggregate size number 67 for Bedding Zone. Pipe with greater than 10 feet cover:
Date added: February 21, 2012 - Views: 15
Description NO.4 Coarse Aggregate ASTM C33 TABLE 2 (1 W -%") No.4 Screen or Sieve Size I i Percent Passing i 2" I 100 100 I 1-112" 100 90 -100 i 1" I 39 20 -55 I 3/4" 4 0-15 I 1/2" I 1 -3/8" 1 0-5 NO.4 0 -NO. 8 0 -No. 200 0.3 0-1.5 i Bulk ...
Date added: July 10, 2013 - Views: 4
Table 3.2-1. Reference Codes and Standards . AASHTO American Association of State Highway and Transportation Officials . AASHTO GDPS-4 1993 “Guide for Design of Pavement Structures” ... ASTM C33-03 “Standard Specification for Concrete Aggregates”
Date added: October 27, 2011 - Views: 58
ASTM C 33 Siz e # #6 S@;:1 ... that meets Xerxes' backfill size requirements. B2.2. ASTM International and The American Association of State Highway and Transportation Officials (AASHTO) have specifications for standard sizes of coarse aggregate. B2.3. TABLE B1-1 gives the standard sizes of ...
Date added: April 30, 2012 - Views: 7
2 ASTM Committee B05 On Copper and Copper Alloys ... C33. Quality Assurance 19 ... The property requirements are frequently placed in a table. C14.1.2 When a requirement is optional, or when the requirement of performance of the test is
Date added: November 1, 2011 - Views: 103
and 8 per ASTM C33) divided by the total aggregate volume, expressed as a percent 0 5 10 15 20 25 30 35 Sieve Size Pe rc en t Re ta i ned 0 5 10 15 20 25 30 35 Sieve Size Pe rc en t Re ta in ed 57.7% ... ACI 211.1,16 Table 6.3.6 (the control mixture in each stage prepared using WG aggregate were ...
Date added: March 23, 2012 - Views: 31
2. ASTM C33 Specification for Concrete Aggregates 3. ASTM C39 Test Method for Compressive Strength of Cylindrical Concrete Specimens 4. ... cubic yard specified in Table 03305-A, regardless of the fact that the strengths specified
Date added: September 6, 2014 - Views: 1
TF 3132 Concrete Table Set SITE FURNISHINGS PO BOX 1520,WAUSAU, WI 54402-1520 (800) 388-8728 Options: Note: Options may change without notice. ... ASTM C33 2. ASTM C150 3. ASTM C31 1.5 SUBMITTALS A. Submit product data, shop drawings and Samples. 1.
Date added: November 25, 2013 - Views: 1
ASTM test methods, are shown in Table 1. Similar results are obtained with FastSetTM DOT Mix Extended (1244-81) or with the addition of up to 25 lb (11.3 kg) of high quality ASTM C33 size number 8 aggregate (100% -1/2" (12.7 mm)) to a bag of FastSetTM DOT Mix (1244-56). INSTALLATION
Date added: October 2, 2012 - Views: 10
Table 2 provides typical values of thermal properties of commonly employed concrete aggregates; ... mixture that contains ASTM C33 No. 57 crushed limestone stone and natural sand and would otherwise normally be considered as gap graded.
Date added: January 27, 2012 - Views: 3
ASTM C33 Concrete Aggregates ASTM C39 Compressive Strength of Cylindrical Concrete Specimens ASTM C40 Organic Impurities in Fine Aggregate for Concrete . City of Ceres 03300-2 Cast-in-Place Concrete Well No. 19R July 2009 Reference Title
Date added: September 19, 2014 - Views: 1
Aggregate gradation shall conform to ASTM C33, Table 2, Size No. 7 for coarse aggregate, and ASTM C33, Section 6.1 for fine aggregate. OA Control: Alkali reactivity shall be tested to ASTM C289 or ASTM C227 . D. Water Mixing water shall ...
Date added: October 17, 2013 - Views: 6
SikaGrout® 328 High performance, precision, grout with extended working time Description ®SikaGrout 328 is a non-shrink, non-metallic, ... and comply with ASTM C33 size number 8 per Table 2. Add the pea gravel after the water and SikaGrout ® 328.
Date added: October 31, 2012 - Views: 6