Din 28091 1 pdfs

Searching:
Download
Din 28091 1 - Fast Download

Download Din 28091 1 from our fatest mirror

DIN HANDBOOK 142 - KSSN

8015 dl's @ 3325 KB/s

pdf
DIN HANDBOOK 142 - KSSN

DIN 28091-1 , Publication date: 1995-09 Technical delivery conditions for gasket sheets - Part 1: Gasket materials; general requirements STANDARD DIN 28091-2 , Publication date: 1995-09

http://www.kssn.net/upload/kssn/din_handbook/DIN_HANDBOOK_142.pdf

Date added: April 16, 2012 - Views: 247

pdf
LS 048-1XX EN - Linde Engineering

DIN 28091 Technical delivery conditions for gasket sheets Part 1 Gasket materials; General requirements Part 2 Fibre-based gasket materials (FA) - Requirements and testing Part 3 PTFE-based gasket materials (TF) - Requirements and testing

http://ebusiness.linde-le.com/ls.ext/Data/LS000/048-/1XX/E0909.pdf

Date added: May 18, 2012 - Views: 72

pdf
Basrur Uniseal Pvt. Ltd.

DIN 28091-FA-AN13-O and ASTM F 104 (F712550-E57-L169-M4). Properties Controlled Oil Swell Density (g/cm3) DIN 53479 1.6 to 1.9 Compressibility % ASTM F36A 5 to 15 Recovery % ASTM F36A 45 (min) Tensile Strength (N/mm2) across fibre DIN 52910 7 (min ...

http://basrur.in/yahoo_site_admin/assets/docs/Basrur_Uniseal_Datasheet_BG_2040.365104154.pdf

Date added: May 10, 2013 - Views: 5

pdf
Gasket Sheets - DONIT

EN 1514-1, Type IBC, PN 40/DIN 28091-2, 3.8/thickness 2.0 mm 0 50 100 150 05 0 100 150 200 250 300 350 400 450 PRESSURE (bar) TEMPERATURE (°C) BACF 4000. Gasket Sheets Environment friendly gasket material with supreme mechanical properties.

http://www.donit.eu/wp-content/uploads/2012/06/DONIT_HighPerformance_Tisk-OK.pdf

Date added: April 24, 2013 - Views: 21

pdf
Victor Reinz AFM 34 - Philippe Jans

)RUP RI GHOLYHU\ *DVNHWV according to a drawing, dimensions given or other arrangement. 6KHHWV 1500 x 1500 mm (standard size) 1RPLQDO WKLFNQHVVHV DQG WROHUDQFHV acc. to DIN 28091-1

http://www.philippejans.be/ned/producten/docs/flensafdichtingen/Victor%20Reinz%20AFM%2034.pdf

Date added: February 5, 2012 - Views: 7

pdf
European Association e.V. Tightness in gasketed fl anged unions

- DIN 28091-1 defi nes general requirements regarding dimensions and markings. Technical delivery conditions are defi ned for compressed fi bre materials (DIN 28091-2), PTFE gasket materials (DIN 28091-3) and graphite

http://europeansealing.com/uploads/resources/ESA_BAT_1112_Gasket_tightness_2_early_standards.pdf

Date added: August 22, 2013 - Views: 3

pdf
Gasket Sheets - DONIT

EN 1514-1, Type IBC, PN 40/DIN 28091-2, 3.8/thickness 2.0 mm TEMPERATURE (°C) BAU 2000 EN 1514 - 1, Type IBC, PN 40, DIN 28091-2 / 3.8, 2.0 mm. Gasket Sheets Environment friendly gasket material with excellent torque retention and thermal resistance.

http://donit.eu/wp-content/uploads/2012/06/DONIT_HighPerformance.pdf

Date added: May 10, 2013 - Views: 6

pdf
Cross-polarization characterization of GORE{TEXr slabs at ...

1GORE{TEX GRr sheet gasketing, according DIN 28091, TF-0-0. (a) Measurement Set-up (b) GORE{TEX sample Fig. 1: Measurement set-up for the characterization of GORE{TEXr GR sample. bolometer is used to allow power detection of the co- or cross-polar polarization of the SUT transmitted signal.

http://www.alma.nrao.edu/memos/html-memos/alma551/memo551.pdf

Date added: January 6, 2013 - Views: 7

pdf
AFM 34 - REINZ

AFM 34 1 - 4 Copyright VICTOR REINZ 2012. Approvals DIN- DVGW (acc. to DIN 3535, part 6 FA) SVGW Swiss Gas And Water Society ... DIN 28091-2: Cold creep ...

http://datenblatt.reinz.de/_pdf/out/web1/AFM_34_en.pdf

Date added: December 28, 2012 - Views: 16

pdf
Product range: BAGL 3000 - Industrial Gaskets

EN 1514-1, Type IBC, PN 40/DIN 28091-2, 3.8/thickness 2.0 mm BAGL 3000 0 50 100 150 0 50 100 150 200 250 300 350 400 PRESSURE (bar) TEMPERATURE (C°) 0,0 50,0 100,0 150,0 200,0 250,0 0 50 100 150 200 250

http://industrialgaskets.com.au/uploaded/Tesnit%20BAGL-3000.pdf

Date added: June 3, 2014 - Views: 2

pdf
Technical Data Sheet - Frenzelit Sealing

acc. DIN 28091-1 Standard Unity Value * Physical DIN 28 091-2 FA - A 1 - O properties (Gasket thickn. DIN 28 090-2 [g/cm³] 1,70 2.00mm) DIN 52 910 [N/mm²] 18 ... DIN 3535-6 [mg/(m *s)] ≤ 0,1 DIN 28 090-2 [mg/(m *s)] ≤ 0,1 ASTM F 146 5h/150°C Weight change [%] ≤ 10 Thickness increase ...

http://www.frenzelitsealing.com/file/147_TDB%20Premium%20II_e_20mm.pdf

Date added: May 10, 2013 - Views: 9

pdf
novatec PREMIUM XP - Paramount Supply

acc. DIN 28091-1 Standard Unity Value * Physical DIN 28 091-2 FA - A 1 - O properties (Gasket thickn. DIN 28 090-2 [g/cm³] 1.74 2.00mm) DIN 52 910 [N/mm²] 20 [N/mm²] 18 DIN 52 913 [N/mm²] 37 [N/mm²] 30 ASTM F 36 J [%] 6

http://www.paramountsupply.com/products_docs/frenzelit/TDB%20novatec%20PREMIUM%20XP%20_%202_0%20mm%20_%20englisch.pdf

Date added: August 27, 2013 - Views: 1

pdf
Technical Data Sheet

DIN 28 090-2 [g/cm³] 1.00 ± 0.05 2.40mm) DIN 52 910 [N/mm²] ≥ 2.0 [N/mm²] ≥ 1.2 DIN 52 913 [N/mm²] ≥ 35 [N/mm²] ≥ 30 ASTM F 36 J [%] ≤ 50 ... acc. DIN 28091-1 Property Identification Density Tensile strength longitudinal transverse

http://www.frenzelitsealingsystems.com/file/621_TDB%20novatec%20825%20F_e_24mm.pdf

Date added: August 28, 2014 - Views: 1

pdf
Basrur Uniseal Pvt. Ltd.

To DIN 28091-1). Nominal thicknesses and tolerances acc. to DIN 28091-1 (mm). Limits of size within a delivery. 0.50 :±0.10, 0.80 :±0.10, 1.00 :±0.10, 1.50 :±0.15, 2.00 :±0.20, 3.00 :±0.30, 4.00 :±0.40 ...

http://www.basrur.in/yahoo_site_admin/assets/docs/Basrur_Uniseal_Datasheet_BG_2040.138105300.pdf

Date added: September 4, 2014 - Views: 1

pdf
novapress MULTI II - Paramount Supply

acc. DIN 28091-1 Property NBR DVGW / BAM (max. 60°C / 130 bar) / GL both sides A310 both sides blue • Application in steam (saturated steam up to max. 250°C) • Jointing material for dynamic stresses Ausgabe: 07.10 Modifications: 12 Binders:

http://www.paramountsupply.com/products_docs/frenzelit/TDB%20novapress%20MULTI%20II_e.pdf

Date added: August 10, 2013 - Views: 1

pdf
Product range: BACF 4000 - Tömítés- és ...

EN 1514-1, Type IBC, PN 40/DIN 28091-2, 3.8/thickness 2.0 mm BACF 4000 0 50 100 150 0 50 100 150 200 250 300 350 400 PRESSURE (bar) TEMPERATURE (C°) P-T DIAGRAM The Pressure - Temperature charts are the most current method of determining the suitability of a gasket material

http://www.dynoteq.com/en/files/en/donit-tesnit/bacf-4000.pdf

Date added: July 22, 2014 - Views: 1

pdf
novatec engineered graphite with Kevlar - Frenzelit Sealing

Tolerances in size and thickness: acc. to DIN 28091-1 * = Mode (typical value) The technical data stated has been determined with standard material under laboratroy Density Identification Tensile strength Frenzelit Werke GmbH · Postfach/P.O.Box 11 40 · 95456 Bad Berneck/Germany

http://www.frenzelitsealing.com/file/2846_NT%20925F%20_%200,8mm_englisch.pdf

Date added: June 10, 2013 - Views: 4

pdf
AFM 37 - Tóth és Társai Tömítésgyártó és Forgalmazó ...

acc. to DIN 3535, part 6 FA mg/ (s·m) < 0.1 Swelling acc. to ASTM F 146 in IRM 903 Oil (replaces ASTM Oil No. 3) 5 h, 150 °C increase in thickness % < 10 increase in weight % < 15 in ASTM Fuel B 5 h, room temp. ... DIN 28091-2: Cold creep ...

http://tothtomites.hu/pdf/AFM_37_en.pdf

Date added: March 14, 2014 - Views: 1

pdf
KLINGERSIL C-4400 A Universal Material for Safe and Reliable ...

KLINGERSIL C-4400 ® Tightness class L= 0.1 allows a maximum leakage of 0.1 mg nitrogen per second per meter of gasket length (mg/s x m) ... DIN 28090-1 VDI 2440 DIN 28091-2 DIN 28091-2 DIN 28091-2 DIN 28091-2 DIN 28091-2 oil JRM 903: 5h/150°C fuel B: 5h/23°C R OA

http://www.klinger-marketing.com/media/pdf/products/c4400_e.pdf

Date added: May 20, 2013 - Views: 5

pdf
galutinis20111027 sukreivintas po 1 lapa sviesintas

Official Agent of IDT Group sealing 091.GR-10 60 1 K-cr 091-GR-IO-O-IK. @ 356 DIN 28091-GR-10-O-1K-Cr DIN 28091 NOG -G DIN 2 DIN 28091-G DIN 2

http://www.asela.lt/images/default/source/attachments/ASELA_kainorastis_2012.pdf

Date added: August 28, 2014 - Views: 1

pdf
Product range: BAU 2000 - Dynoteq

DIN 28091-2 FA-A1- 0 Colour Greenish blue / Greenish blue APPROVALS DIN-DVGW, BAM, HTB, UDT, TARRC/MRPRA, BS 7531 Grade Y General information for a thickness of 2 mm DIMENSION OF STANDARD SHEET Sheet size Thickness* Tolerances 1000 mm x 1500 mm

http://www.dynoteq.com/en/files/en/donit-tesnit/bau-2000.pdf

Date added: July 4, 2014 - Views: 1

pdf
AFM 37 - 123gaskets

DIN 28091-2: Cold creep ... Page 1 of 3 mhtml:file://V:\AFM 37 betriebsdrucktabelle_php EN.mht 21 -10 -2013. 3) With strong acids or alkaline solutions such as hydrochloric acid or caustic potash solution, and temperatures above 50 °C, tests under real operating

http://www.123gaskets.com/prod/prodpdf/afm_37_9_1.pdf

Date added: March 24, 2014 - Views: 1

pdf
novatec PREMIUM II - Vestpak

acc. DIN 28091-1 Standard Unity Value * Physical DIN 28 091-2 FA - A 1 - O properties (Gasket thickn. DIN 28 090-2 [g/cm³] 1,70 2.00mm) DIN 52 910 [N/mm²] 18 ... DIN 3535-6 [mg/(m *s)] ≤ 0,1 DIN 28 090-2 [mg/(m *s)] ≤ 0,1 ASTM F 146 5h/150°C Weight change [%] ≤ 10 Thickness increase ...

http://www.vestpak.no/sfiles/3/96/1/file/04011.pdf

Date added: May 10, 2013 - Views: 5

pdf
Case Study No. 6: For the lifetime of the machine – AFM 38 ...

Residual stress DIN 52913 16 hrs, 175 °C Compressibility and recovery ASTM F36 J Compressibility Recovery Sealability DIN 3535-6 FA ... according to DIN 28091-1 Form of delivery Germany Phone +49 (0) 731-70 46-777 Fax +49 (0) 731-70 46-399 AFM® 38 > 7 N/mm2 ~ 20 N/mm2 15-25 % > 60 % < 0,1 cm3/min

http://www.reinz-industrial.com/img_cpm/005/files/fallstudien/fallstudie_6_eng.pdf

Date added: August 28, 2014 - Views: 1

pdf
AFM 34 - 123dichtingen - speciale dichtingen in 3 makkelijke ...

Nominal thicknesses and tolerances acc. to DIN 28091-1 (mm) Dimensional limits within a shipment 0.30 ±0.10 0.50 ±0.10 0.75 ±0.10 1.00 ±0.10 1.50 ±0.15 2.00 ±0.20 3.00 ±0.30 4.00 ±0.40 5.00 ±0.50 Max. thickness variation in a sheet:

http://www.123dichtungen.com/prod/prodpdf/afm_34_10_2.pdf

Date added: May 21, 2014 - Views: 1

pdf
Gasket factors Dichtungsfaktoren - Klinger

DIN 28090/DIN 28091 DIN 2505 ASTM ... KLINGER GmbH P.O. Box 1370, D-65503 Idstein Rich.-Klinger-Straße, D-65510 Idstein Tel +49 (0) 61 26 950-0 Fax +49 (0) 61 26 950 340/341 e-mail: [email protected] http://www.klinger-gmbh.de Änderungen vorbehalten.

http://www.klinger.co.za/technical-data/gaskets/docs/Gasket-Factors-DIN.pdf

Date added: December 6, 2012 - Views: 2

pdf
Technical Data Sheet - Frenzelit

DIN 28 090-2 [%] 3 DIN 28 090-2 [%] 1 DIN 28 090-2 [%] 40 DIN 28 090-2 [%] 4 DIN 3535-6 [mg/(m *s)] ≤ 0.015 ... Tolerances in thickness: acc. DIN 28091-1 Approvals: FDA / TA Luft / BAM / DVGW / GL white novaflon 200 with Frenzelit honeycomb Technical Data Sheet

http://www.frenzelit.com/file/1110_TDBnovaflon200_englisch_20mm.pdf

Date added: December 12, 2013 - Views: 2

pdf
Technical Data Sheet - Frenzelit

Tolerances in thickness: acc. DIN 28091-1 Supply data: Approvals: FDA / TA Luft / BAM / DVGW / GL / EG Nr. 1935/2004 Technical Data Sheet novaflon ...

http://www.frenzelit.com/file/1111_TDBnovaflon300_englisch_20mm.pdf

Date added: November 26, 2013 - Views: 1

pdf
novatec SPECIAL engineered graphite with Kevlar

acc. DIN 28091-1 Standard Unity Value * Physical DIN 28 091-2 FA - A 1 - O properties (Gasket thickn. DIN 28 090-2 [g/cm³] 1.00 ± 0.05 2.0 mm) DIN 52 910 [N/mm²] ≥ 2.0 [N/mm²] ≥ 1.2 DIN 52 913 [N/mm²] ≥ 40 [N/mm²] ≥ 38 ASTM F 36 J [%] 45 ± 5 ASTM F 36 J [%] ≥ 8.0 ASTM F 146 5h ...

http://www.frenzelit.com/file/262_TDBSPECIAL_e_20mm.pdf

Date added: May 10, 2013 - Views: 6

pdf
AFM 38 - 123gaskets

AFM 38 Maximum operating pressures at various temperatures and with various media (guiding values) Edition: 05/2012, supersedes all prior editions.

http://www.123gaskets.com/prod/prodpdf/afm_38_8_1.pdf

Date added: April 15, 2014 - Views: 1

pdf
NEW NATIONAL STANDARDIZATION INITIATIVES NOTIFIED UNDER ...

DIN 28090-3; Static gaskets for flange connections - Gaskets made from sheets - Part 3: Chemical resistance test procedures 94 DIN 28091-1 Technical delivery conditions for gasket sheets - Part 1: General requirements for gasket materials

http://www.bds-bg.org/images/upload/Notifications/Notifications_98_34_2013_en/Notifications_1025_04_13_en.pdf

Date added: December 18, 2013 - Views: 4

pdf
E DIN 28091-1:2013-05 (D)

- 1 - E DIN 28091-1:2013-05 (D) Erscheinungsdatum: 2013-04-29 Technische Lieferbedingungen für Dichtungsplatten - Teil 1: Allgemeine Festlegungen für Dichtungswerkstoffe

http://www.nard.din.de/cmd%3Bjsessionid=N8ZNQQ0H92W2EHX925IJK9A7.1?workflowname=infoInstantdownload&docname=2007352&contextid=nard&servicerefname=dino&ixos=toc

Date added: September 30, 2014 - Views: 1

pdf
Technical Data Sheet - Frenzelit

Physical DIN 28 091-3 TF - O - O properties (Gasket thickn. DIN 28 090-2 [g/cm³] 0.90 2.00 mm) DIN 52 910 [N/mm²] 26 DIN 52 913 ... acc. DIN 28091-1 n/a Technical Data Sheet Approvals: TA Luft / FDA / GL / BAM (max. 200°C / 30 bar) Supply data:

http://www.frenzelit.com/file/1505_TDBnovaflon500_englisch_20mm.PDF

Date added: June 12, 2013 - Views: 3

pdf
AFM 30 - Tóth és Társai Tömítésgyártó és Forgalmazó ...

Higher thermal resistance acc. to DIN 3374/3376 (0.1 and 1.0 bar at 650 °C for 30 minutes) Germanischer Lloyd Approval for shipbuilding AFM 30 1 - 3 ... Nominal thicknesses and tolerances acc. to DIN 28091-1 (mm) Dimensional limits within a shipment: 0.30 ±0.10 0.50 ±0.10 0.75 ±0.10 1.00 ±0 ...

http://tothtomites.hu/pdf/AFM_30_en.pdf

Date added: February 15, 2014 - Views: 1

pdf
Victor Reinz AFM 38 - Philippe Jans

1RPLQDO WKLFNQHVVHV DQG WROHUDQFHV acc. to DIN 28091-1 PP Limits of size within a delivery ˘ ˆ˘ ˘ ± 0.10 ± 0.10 ± 0.10 ± 0.10 ± 0.15 ± 0.20 ± 0.30 ... Victor Reinz AFM 38 Author: Mediamind Subject: Victor Reinz AFM 38

http://www.philippejans.be/ned/producten/docs/flensafdichtingen/Victor%20Reinz%20AFM%2038.pdf

Date added: May 10, 2013 - Views: 3

pdf
Во всю страницу

ox. 0.07 (DIN 28091-4) < 0.1 (DIN 28091-4) 550/450 100 450 -C) Pyn0HS AO 500 MM • 2.0 > 40 950/950 pyn0HH AO 500 MM . Title: Во всю страницу Author: admin Created Date:

http://www.sealur.ru/pdf/cat_vr.pdf

Date added: September 12, 2014 - Views: 1

pdf
DE Test Report

Toleranzen nach / Tolerances according to DIN 28091-3 Werkstoff/ Material 100 % ePTFE FDA - approved 21 CFR177.1550 Bedruckt oder geprägt /Printed or embossed FDA - approved DJK Ref. 'No. 02-033

http://www.dinen1591-4.eu/d/zertifikat/Produkte/03-Weichstoffdichtungen/Flachdichtungen/PTFE-Flachdichtungen/FDA-Gore_Konformit%E4tsbescheinigung-31.10.07.pdf

Date added: March 14, 2014 - Views: 4

pdf
FLAT GASKETS - Process Seals | Home

FG-120 FG-180 FG-360 1.5 mm 3.0 mm Type FA-A1-0 DIN 28091-2 TF-M-0 DIN 28091-2 TF-0-0 DIN 28091-3 Material Graphite, aramid fibers

http://www.freudenberg-process-seals.com/ecomaXL/get_blob.php?name=Flat_Gaskets_for_the_Process_Industry.pdf

Date added: August 28, 2014 - Views: 1

pdf
BAM 6000 - Vestpak

Density DIN 28090-2 1.7 – 1.9 g/cm3 Compressibility ASTM F 36/J 5 – 9 % Recovery ASTM F 36/J > 55 % Tensile strength DIN 52910 9 MPa ... DIN 28091-2 FA-M1- 0 Colour Greenish blue / Gray APPROVALS Applied for: DVGW, BAM, HTB, KTW,

http://www.vestpak.no/sfiles/5/26/1/file/04022.pdf

Date added: March 1, 2013 - Views: 5

pdf
Technical Data Sheet JMP ACID - Natal Gaskets

Technical Data Sheet JMP ACID Basis: Aramide Fibres, CSM DIN 28091-2DIN 28091-2 General Properties and Applications: Dimensions of standard sheets:

http://www.natalgaskets.com/documents/specs/igm/jmpacid.pdf

Date added: May 10, 2013 - Views: 12

pdf
Technical Data Sheet JMP 6000 - Natal Gaskets

Technical Data Sheet JMP 6000 Basis: Biosoluble mineral fibres / NBR DIN 28091-2 General Properties and Applications: Dimensions of standard sheets:

http://natalgaskets.com/documents/specs/igm/jmp6000.pdf

Date added: September 30, 2014 - Views: 1

pdf
Technical specification

Hot recovery % 1 DIN 28091-2 Spring back R mm 0.019 DIN 28091-2 Thermal conductivity W/mK 0.40-0.42 This specification is given by our best knowledge and might be submitted to changes. Title: TEKNISK SPECIFIKATION Author: bjsj Created Date: 10/7 ...

http://www.sundquistcomp.se/wp-content/uploads/2011/10/SQ-Teknisk-spec-KLINGERsil-C-4400.pdf

Date added: October 25, 2013 - Views: 5

pdf
AFM 34 CO ME: Flat gaskets with stainless steel inner bead ...

Thickness: DIN 28091-1 Diameters d 1 and d 2: DIN ISO 2768-1 tolerance class v Lateral length b: DN 10 to DN 20 (NPS ½ to ¾): 2,5±0,3 DN 25 to DN 65 (NPS 1 to 2½): 3,5±0,4 DN 80 to DN 150 (NPS 3 to 6): 4,0±0,4 DN 200 (NPS 8): 5,0±0,5 DN 250 ...

http://datenblatt.reinz.de/_pdf/out/web1/AFM_34_CO_ME_en.pdf

Date added: August 22, 2013 - Views: 3

pdf
AFM 37/8 - Just seal it! - Dichtungs Produkte VICTOR REINZ ...

Residual stress acc. to DIN 52 913 16 h, 175 °C N/ mm² ≈ 25 Compressibility and recovery acc. to ASTM F 36, procedure J compressibility % 8 - 15 recovery % > 50 Sealability against nitrogen ... Nominal thicknesses and tolerances acc. to DIN 28091-1 (mm)

http://www.victorreinz.com/functions/csdownload3.aspx?id=125&org=002&key=2a25c2c20222d4846617a36ead3e49f93a3bf0e262b4e5ff054110a0df6ca8e8

Date added: August 28, 2014 - Views: 1

pdf
Technical specification - Sundquist Comp

Hot recovery % 1 DIN 28091-2 Spring back R Mm 0.019 DIN 28091-2 Thermal conductivity W/mK 0.42 This specification is given by our best knowledge and might be submitted to changes. Title: TEKNISK SPECIFIKATION Author: bjsj Created Date: 10/7 ...

http://www.sundquistcomp.se/wp-content/uploads/2011/10/SQ-Teknisk-spec-KLINGERsil-C-4430.pdf

Date added: August 10, 2013 - Views: 1

pdf
Novaflon 200 - Tamesis River

acc. DIN 28091-1 Standard DIN 28 091-3 DIN 28 090-2 DIN 52 910 DIN 52 913 DIN 52 913 DIN 52 913 ASTM F 36 J ASTM F 35 J DIN 28 090-2 DIN 28 090-2 DIN 28 090-2 DIN 28 090-2 DIN 3535-6 VOI 2440fTA-Luft mbar. s.m pro Identification Densi Tensile stren th

http://www.tamesisriver.com.ar/pdf/juntasplanas/Novaflon%20200.pdf

Date added: December 3, 2012 - Views: 1

pdf
Technical Data Sheet - ERIKS

DIN 28 090-2 [%] 3 DIN 28 090-2 [%] 1 DIN 28 090-2 [%] 20 DIN 28 090-2 [%] 3 DIN 3535-6 [mg/(m *s)] ≤ 0.015 ... Tolerances in thickness: acc. DIN 28091-1 Approvals: FDA / TA Luft / BAM / DVGW / GL fawn novaflon 300 with Frenzelit honeycomb Technical Data Sheet

http://www.eriks.sk/dss/docs/521_TDB_novaflon300_-englisch-_20_mm.pdf

Date added: June 25, 2013 - Views: 4

pdf
LOT DETAILS FOR 418CO-1311

482.6 mm, din 28090-28091/4, cl 50 ppm, test certificate 3.1 11337170 234c02 n153 ea 22 gasket, corrugated, 1.4541/x6 crnitil 8-10, 5 mm, dn 350, 0.5 mm thk x 1 mm d, graphite, b29a, 150 lb, heat resist upto 120 deg c , 371.5

http://www.networkintl.com/contents/auction/QFPIRA01CI5N/QFPIRA01CJA7/!QFPIRA01BNEPLOT%20DETAILS%20FOR%20418CO-1311.pdf

Date added: June 1, 2013 - Views: 1

pdf
PTFE SHEET Gylon Sheet Gaskets White 3510 - Home | FlangeGaskets

Identification DIN E 28090-1 TF-Z-0 Range of application Minimal continual temperature -210 ˙C Maximum continual ... Physical properties for a density of 2mm Density DIN E 28091 T.2 2.8 g/cm3 Compressibility ASTM F 36 4-10 % Elastic capacity ASTM F 36 40 % Tensile strength ASTMF - 152 14 N/mm2

http://flangegaskets.info/en/flangegaskets/datasheets/flangegaskets/ptfe/ERIKS%20-%20Gylon%203510.pdf

Date added: October 6, 2012 - Views: 10

pdf
EXPANDED GRAPHITE SHEETS WITH METAL INSERT

0,1 mm). „Expanded graphite sheets with metal insert” are a commercial ... Graflex GR, Sigraflex Uniwersal and other graphite-metal sheets. Classification GR-1M-St according to DIN 28091-4 Application These sheets are designed for cutting gaskets which can work in ...

http://www.polonit.com.pl/pliki/GASKET%20SHEETS%20POLONIT%20GWM.pdf

Date added: July 13, 2013 - Views: 1