Astm F 1450 pdfs

Searching:
Download
Astm F 1450 - Fast Download

Download Astm F 1450 from our fatest mirror

GUIDE SPECIFICATIONS FOR DETENTION SECURITY HOLLOW METAL ...

9304 dl's @ 1917 KB/s

pdf
GUIDE SPECIFICATIONS FOR DETENTION SECURITY HOLLOW METAL ...

G. ASTM F 1450-97 (2004), Standard Test Methods for Hollow Metal Swinging Door . 4 ... Standard Test Methods for Detention Hollow Metal Vision Systems I. ANSI / NAAMM HMMA 801-98, Glossary of Terms for Hollow Metal Doors and Frames J. NAAMM HMMA 803-98, Steel Tables

http://www.trussbilt.com/p_documents/Detention%20Security%20HM%20Spec%203_2005.pdf

Date added: May 10, 2012 - Views: 6

pdf
SECTION 11190 - DETENTION SECURITY HOLLOW METAL DOORS AND FRAMES

Reports and documentation of testing and performance shall be in accordance with ASTM F 1450, Section 9, “Report”, and in accordance with ASTM F 1592, Section 8, “Certification and Reports”.

http://www.habershammetal.com/specs/1_75HollowDoorSpec.pdf

Date added: October 6, 2011 - Views: 47

pdf
SECTION 11190 – BULLET RESISTANT SECURITY HOLLOW METAL ...

bullet resistant ratings where specified in the door schedule. 1.03 RELATED PRODUCTS FURNISHED IN THIS SECTION A. Hardware ... J. ASTM F 1450-05, Standard Test Methods for Hollow Metal Swinging Door Assemblies for Detention Facilities

http://www.habershammetal.com/specs/BulletSpecs.pdf

Date added: February 22, 2012 - Views: 5

pdf
www.nospill.com

Testing Services Group Testing Services Group, 828 Whitney Drive Lapeer, Ml 48446 ASTM F 852-99 (REAPPROVED 2006) LLC P 245-1600 f 245-1606 www.tsglabs.com

http://www.nospill.com/ASTM_1450.pdf

Date added: September 12, 2013 - Views: 1

pdf
ASTM F 2389-3 - IAPMO

astm standard f 2389 – standard specification for pressure-rated polypropylene (pp) piping systems side by side comparison of standards astm f 2389-2007 and astm f

http://intranet.iapmo.org/standards/docs/iapmo_std_1450.pdf

Date added: April 20, 2014 - Views: 1

pdf
GUIDE SPECIFICATIONS FOR DETENTION SECURITY TRUSSWALL CELL SYSTEM

guide specifications for detention security trusswall cell system trussbilt, llc (complies with astm f 2322-03 - astm f 1450 astm f 1592 - ansi/naamm hmma 863 and ul 752)

http://www.trussbilt.com/p_documents/TrussWall_Specification_042108-2.pdf

Date added: May 7, 2012 - Views: 4

pdf
Probabilistic Life Prediction Isn't as Easy as It Looks

ASTM STP-1450, #11557, Page 2 o13 a MC simulation using this joint density reproduces the specimen mean and standard deviation to within a few percent.

http://www.statisticalengineering.com/Annis_ASTM_STP-1450_ID11557.pdf

Date added: March 14, 2013 - Views: 1

pdf
SEALVAR (ASTM F-15 Alloy or UNS K94610) Nickel Iron Cobalt Strip

SEALVAR ® (ASTM F-15 Alloy or UNS K94610) ... 1450°C CURIE POINT 435°C SPECIFIC HEAT cal/gm/°C@0°C: 0.105 cal/gm/°C@430°C: 0.155 HEAT OF FUSION 64 cal/gm Specifications ... NOTE: Values for material annealed to ASTM #8.0-9.5 grain size.

http://www.ametek-ct.com/download/Sealvar%20(ASTM%20F-15%20Alloy%20or%20UNS%20K94610)%20Nickel%20Iron%20Cobalt%20Strip.pdf

Date added: September 30, 2012 - Views: 7

pdf
ULTRA CORR / ULTRA RIB - JM Eagle

21 20.656 22.92 26.17 0.160 1450 24 23.412 25.77 28.91 0.180 2120 27* 26.371 29.14 32.85 0.205 2470 ... ASTM F-794/949 PVC PROFILE WALL SEWER PIPE Product Standard: Pipe Compound: Gasket: Integral Bell Joint: Pipe Stiffness: Pipe Length: Installation:

http://www.jmeagle.com/pdfs/2008%20Submittal%20Data%20Sheets/Ultra%20Corr-Rib.pdf

Date added: October 26, 2012 - Views: 3

pdf
Ultra rib / Ultra corr - JM Eagle

astM d3212 astM d2412 F/ Y = 46 Psi 14 feet laying length JM eagle™ installation Guide ... 21 20.656 22.92 26.17 0.160 1450 24 23.412 25.77 28.91 0.180 2120 27* 26.371 29.14 32.85 0.205 2470 30 29.388 32.38 36.68 0.235 3550

http://www.jmeagle.com/pdfs/Submittal%20and%20Data%20Sheet%20and%20One%20Sheet%20combined/UltraCorr_UltraRib_one-page-slick_v1.pdf

Date added: October 9, 2012 - Views: 6

pdf
Sheet Materials Data Sheets 04.04 - Flexitallic

Member of The Flexitallic Group COMPRESSED FIBER SHEET SF 2420 PRODUCT PROFILE ... Weight Increase Oil #3 @ 300°F 6.4% Fuel B @ 70 - 85°F 3.3% ASTM F36J Compressibility 7.5% ... (°F) 1450 Major Manufacturing Plants Flexitallic L.P. 6915 Highway 225

http://www.flexitallic.com/uploads/files/dataSF2420.pdf

Date added: October 22, 2013 - Views: 1

pdf
Test report - SCGAT080818A - FSTC - Food Service Technology ...

Lincoln, Model Imperial 1450-000-U-K1825 . Conveyor Oven Performance Test . Revision 0 . Southern California Gas Company . Customer Programs Department . ... within the ± 5°F tolerance set forth in the ASTM F 1817-97 (2003) test method section 10.2.5.

http://www.fishnick.com/publications/appliancereports/ovens/Lincoln_1450-000-U-K1825_ConveyorOven_scg.pdf

Date added: August 25, 2013 - Views: 3

pdf
BA-F BA-S Gasket Sheets - DONIT

Compressibility ASTM F 36J % 7 Recovery ASTM F 36J % 50 Tensile strength DIN 52910 MPa 9 Stress resistance DIN 52913 16h, 300°C, ... 280°C / 536°F 250°C / 482°F 100 bar / 1450 psi 7 % 50 % 9 MPa 25 MPa 30 MPa 0.08 mg/(s.m) 5 % 8 % Typical values (thickness 2.0 mm)

http://donit.eu/wp-content/uploads/2012/06/DONIT_CustomLine.pdf

Date added: July 30, 2013 - Views: 1

pdf
SECTION 11198 - MANUFACTURED STEEL DETENTION CELLS

ASTM 1450 -97; Hollow Metal Swinging Door Assemblies for Detention Facilities. 2. Paint Performance: Submit testing of coating system that complies with the performance requirements as outlined in Finish section 2.11. a. 1.

http://www.steelcell.com/wp-content/uploads/2010/03/DIVISION-11-Shower-Cell-Spec-NEW.pdf

Date added: February 1, 2012 - Views: 12

pdf
P03478 Fiches 7600-ME, 7620-ME, 5045 mai12 en-2

ASTM F476 against break in (level reached, Grade 40) TEST OF IMPACT: • ASTM F 1450 (2" thick) for penitentiary (Level 4) OPTIONS I Wood veneer glued to plywood veneer (3 plg plywood) Special high impact wood or steel moulding for openings.

http://www.baillargeondoors.com/download/Fiches-7620-ME-mai12-en-2.pdf

Date added: March 1, 2014 - Views: 2

pdf
Chapter 5 - Standard Specifications, Standad Test Methods and ...

Chapter 5 Standard Specifications, Standard Test Methods and Codes for PE (Polyethylene) Piping Systems 127 TABLE 1 Cell Classification System from ASTM D 3350-06 1,2

http://www.plasticpipe.org/pdf/chapter05.pdf

Date added: January 31, 2012 - Views: 332

pdf
Probabilistic Aspects of

STP 1450 Probabilistic Aspects of Life Prediction W. Steven Johnson and Ben M. Hillberry, editors ASTM Stock Number: STP1450 mlrloA~.

http://www.astm.org/DIGITAL_LIBRARY/STP/SOURCE_PAGES.OLD/STP1450_foreword.pdf

Date added: August 5, 2013 - Views: 1

pdf
TECHNICAL DATA SHEET MATERIAL COMPRESSED NON-ASBESTOS GASKET ...

Maximum Operating Pressure 1450 PSI Specification Compliance BS 7531 Grade Y PROPERTIES TEST METHOD UNIT SPECIFIED VALUE ... IN WATER/ANTIFREEZE ASTM F 146 INCREASE IN MASS % ≤10 INCREASE IN THICKNESS % ≤ 5 6. IGNITION LOSS DIN 52911 % ≤ 36 7.

http://www.accesshoseintl.com/NAM30.pdf

Date added: July 9, 2013 - Views: 3

pdf
Sheet Materials Data Sheets 04.04 - Essential Sealing ...

ASTM F-36 ASTM F37A ASTM F-38 BS 7531 Member Of The F exitallic 1508 psi (10.4 MPa) 4090 psi (28.2 MPa) IRM 903 @ Fuel B @ 70 - 85ØF ... 1450 1/32 637 1330 1/16 572 1015 SF 2401 Thickness (in) Max Temperature (OF) Max. Pressure (psi) NOTE:

http://espsealing.com/pdf/flexitallic/SF2401.pdf

Date added: April 4, 2014 - Views: 2

pdf
TECHNICAL DATA SHEET - Access Hose Int'l

Maximum Operating Pressure 1450 PSI Specification Compliance ASTM Line callout F104F712122A9B4E12M4 PROPERTIES TEST METHOD UNIT SPECIFIED VALUE ... CREEP RELAXATION ASTM F 38 % 30 Max. NOTE : All information and recommendations given in this brochure are correct to the best of our

http://www.accesshoseintl.com/NAM37.pdf

Date added: August 1, 2013 - Views: 1

pdf
STEEL CASTINGS HANDBOOK Supplement 8 High Alloy Data Sheets ...

Cast ASTM: A743 (CA6NM), A757 (E3N), A487 (CA6NM), A352 (CA6NM). ... 1450 oF F.C. to 1000 oF ASTM A743 then A.C. _____ _____ Tensile strength, ksi 95.0 65.0 Yield strength, 0.2% offset, ksi 60.0 30.0 Elongation, in 2in., % 15 - Brinell ...

http://www.sfsa.org/sfsa/pubs/hbk/s8.pdf

Date added: December 16, 2011 - Views: 622

pdf
Standard Specification for Drawn or Rolled Nickel-Chromium ...

2.1 ASTM Standards: A 751 Test Methods, Practices, and Terminology for ... The resistivity above 1450°F is reproducible regardless of previous treatment below this temperature. (The 60 nickel-16 chromium alloy may change up to 2 % under similar

http://web.askewindustrial.com/ASTM/B344.pdf?tblASTMSpecsPage=23

Date added: September 20, 2013 - Views: 1

pdf
Natural Gas Material Specifications - Home | Miller Pipeline

DO NOT COPY – DO NOT DUPLICATE 2 o f 4 09/12/00 Miller Pipeline Corporation Physical Properties Specification Suffix EO14 ASTM D-471

http://www.millerpipeline.com/wp-content/uploads/2014/06/Natural_Gas_Material_Specifications.pdf

Date added: October 2, 2014 - Views: 1

pdf
Sheet Materials Data Sheets 04.04 - Essential Sealing ...

ASTM F36J ASTM F37A ASTM F-38 BS 7531 Member of The Flexitallic Group Compressibility Recovery Fuel A @ 50 psi & 1000 psi Gasket Stress Creep Relaxation Nitrogen Gas Permeability . ... 1450 1/32 725 1330 1/16 1015 0.080 725 290 4000 1/8" NOTE o, 08"

http://espsealing.com/pdf/flexitallic/SF2420.pdf

Date added: May 21, 2014 - Views: 1

pdf
Cross Reference Of Popular Physical Properties of Steel ...

ASTM Spec EN Spec 1020 10083-2 C22 1030 10083-2 C30 1040 10083-2 C40 1045 10083-2 C45 4130 10083-1 34CrMo4 ... Melting Point 2370°F–2640°F 1300°C–1450°C Specific Heat 0.12 Btu (lb) (°F) 0.12 (Cal) (gr) (°C) Linear Coefficient of Thermal Expansion

http://www.arcelormittalna.com/plateinformation/documents/en/Inlandflats/ProductBrochure/physical%20properties%20of%20steel.pdf

Date added: June 4, 2012 - Views: 41

pdf
DURALITE-60

Deformation Under Load, % (ASTM C-16) (2460 °F. (1450 °C.)) 1.7 Reheat, % (ASTM C-113) (5 hrs. at 2910 °F. (1600 °C.)) +2.0 Al 2 O 3 61.0% SiO 2 33.5 Fe 2 O 3 1.6 TiO 2 2.5 CaO 0.2 MgO 0.2 Na 2 O + K 2 O 0.7 The properties shown on this data sheet represent typical average results generated

http://www.rescoproducts.com/docs/PDS/Old%20Duralite-60%20PDS.pdf

Date added: October 2, 2014 - Views: 1

pdf
Mykin Inc RV00175 BLACK ASTM SPEC VITON COMPOUND

ASTM ASTM D2000 Designation ... psi (MPa), Minimum 1450 (10) Elongation, % Minimum 150 Specific Gravity - A1-10 HEAT AGE, 70 HRS @ 250 C Durometer Change, Points +10 Tensile Strength Change, % Maximum ... ASTM D2000-01 Grade M6HK810 A1-10 B38 C12 C20 EF31 EO88 F15. Title: RV00175

http://mykin.com/media/catalog/product/pdf/RV00175.pdf

Date added: October 14, 2012 - Views: 5

pdf
PRESSURE/TEMPERATURE RATINGS TABLE 8 ASTM A351 Grade CF3M (a ...

ASTM A351 Grade CF8M (b) (a) Not to be used over 850° F. ... 1450 20(2) 60 115 175 290 485 875 1500 15(2) 40 85 125 205 345 620 Working Pressures by Classes, psig Temperature, ºF 150 300 600 900 1500 2500 4500 -20 to 100 (1 ...

http://www.powellvalves.com/docs/A351%20CF3M%20&%20CF8M.pdf

Date added: November 20, 2013 - Views: 9

pdf
High Purity Nickel Strip

type grade softening curve1 half hard softening2 knee, temperature °f ... (30 min. at 1450° f) condition) temper uts 0.2% ys elongation rockwell b vickers hardness annealed 50-58 15-20 40 ... astm f-3, astm f-239, mil-n-19153 and mil-n-46025 astm grain size after indicated heat ...

http://www.ametek-ct.com/download/Nickel-Brochure.pdf

Date added: February 3, 2012 - Views: 3

pdf
TDS MB1450 Ver 3.1 03-25-2014

1450 DESCRIPTION Miracle Bond 1450 is a multipurpose, high strength, slower curing epoxy bonding and ... Properties ASTM 77°F Gel time 60 gm sample @ 77°F minutes C881 20 Tack Free Time @ 77°F ¼” thick minutes 100 (w / peak ...

http://www.atcepoxy.com/wp-content/uploads/2014/09/miraclebond1450-tds.pdf

Date added: October 2, 2014 - Views: 1

pdf
HDPE WATERSTOP For Corrugated HDPE Pipes - Press Seal

HDPE WATERSTOP For Corrugated HDPE Pipes and Concrete Structures What It Is ... MIN. 1450 PSI ELONGATION AT BREAK D 412 350%, MIN. 540% HARDNESS D 2240 ... • ASTM F 2510 Standard Specification for Resilient Connectors Between

http://press-seal.com/Downloads/HDPEWATERSTOPProductLiterature.pdf

Date added: June 11, 2013 - Views: 2

pdf
PRESSURE/TEMPERATURE RATINGS TABLE 7 ASTM A182 F316

1450 20(1) 60 115 155 290 485 875 1500 15(1) 40 85 110 205 345 620 TABLE 8 ASTM A182 F304 At temperatures over 1000º F, use only when the carbon content is 0.04% or higher. This requirement must be specified by customer when applicable. NOTE: (1) For ...

http://www.powellvalves.com/docs/A182%20F316%20&%20A182%20F304.pdf

Date added: November 9, 2013 - Views: 1

pdf
V75 (FKM) Material Properties - Anchor Rubber

V75 (FKM) Material Properties Specification: ASTM D2000 M4HK710 A1-11 B38 EF31 EO78 Z1 Z2 Z1: Hardness = 75 +/- 5 Shore A, Z2: Viton Type A Cure System: Bisphenol

http://www.anchorrubber.com/pdf/commercial_viton.pdf

Date added: November 23, 2011 - Views: 13

pdf
PEX Pipes for NFPA 13D Residential Fire Sprinkler Applications

PEX tubing is produced and certified to ASTM F876 ... (1,450 kPa @ 82° C) • 180 psi @ 200°F (1,240 kPa @ 93° C) ... – Long-term Pressure Rating of 130 psi @ 120° F for fire sprinkler applications. Also rated at: • 160 psi @ 73.4°F, ...

http://plasticpipe.org/pdf/pex-plumbing-sprinklerapplications-01-17-2013.pdf

Date added: May 11, 2013 - Views: 8

pdf
Pressure/Temperature Charts ASTM A216 Grade WBC//A105 ...

Pressure/Temperature Charts ASTM A216 Grade WBC//A105 Upon prolonged exposure to temperatures above 800°F, the carbide phase of steel may be converted to

http://teknopoli.com/PDF/Pressure-Temperature%20Charts%20ASTM.pdf

Date added: June 12, 2012 - Views: 26

pdf
Datenblatt P EN-ASTM - TenCate

Trapezoidal tear resistance MD* N 850 980 1080 1180 1350 1450 [ASTM D 4533] CD* N 870 1030 1150 1250 1400 1320 Puncture resistance ... ASTM T I F R I E E C D SYSTEM CERTIFIED qualityaustria ISO 9001:2000 NR.00631/0 Q. Title: Datenblatt P EN-ASTM.cdr

http://www.tencate.com/emea/Images/tencate_polyfelt%20p_technicaldata_en-astm_502816_tcm28-7524.pdf

Date added: May 21, 2013 - Views: 6

pdf
Pipe - Single Wall - Accupipe - Drainage Tile & Pipe ...

6" X 1450' Maxi Non-Perf 8" X 390' Mini Non-Perf 8" X 390' Mini Perf 8" X 825' Maxi Perf 8" X 825' Maxi Non-Perf ... • ASTM F 2306: Standard Speci˜cation for 12” – 60” (300 – 1500 mm) Annular Corrugated Pro˜le-Wall Polyethylene

http://www.accupipe.ca/wp-content/uploads/2013/07/2_singlewall.pdf

Date added: March 13, 2014 - Views: 2

pdf
COMMERICAL VITON ASTM D2000 - Seal and Design

VITON ASTM D2000 . Material: VI751017(FKM 75 BLACK –DUPONT POLYMER) ... 1450 150 Report 76 1885 139 1.863 D2240 D412 D412 D297 A1-10 ... (73°F) Hardness change, pts. Shore A Tensile strength change, % max

http://www.sealanddesign.com/Public/files/Viton-O-Rings-Commercial.pdf

Date added: March 7, 2013 - Views: 7

pdf
Standard Specification for Seamless and Welded Steel Pipe ...

2.1 ASTM Standards: 3 A 370 Test Methods and Definitions for Mechanical Testing ... Reheat until the pipe attains a uniform temperature of 1450 6 25°F [7906 15°C]; hold at this temperature for a minimum time in the ratio of 1 h/in. [2 min/mm] of thickness, but in no

http://www.gaslinepipe.com/wp-content/uploads/2013/06/ASTM-A333-2004-Standard-Specification-for-Seamless-and-Welded-Steel-Pipe-for-Low-Temperature-Service.pdf

Date added: November 6, 2013 - Views: 5

pdf
Standards and Specifications - Powers

M 291 ASTM A 563 M 292 ASTM A 194 M 293 ASTM F 436 American Concrete Institute (ACI) www.concrete.org ... MegaPascal (MPa) Kilo-pound/square 0.1450 inch (ksi) MegaPascal (MPa) Pound/square inch (psi) 145.0 Pascal (Pa) Newton/square 1.0 meter (N/m 2)

http://www.powers.com/pdfs/catalogs/00017_ae_appendix_hi.pdf

Date added: September 30, 2012 - Views: 34

pdf
DuPont Viton F-605C - DuPont USA | Global Headquarters

DuPont™ Viton® F-605C Technical Information — Rev. 3, July 2010 Introduction DuPont™ Viton® F-605C is a new generation incorporated cure “F-family” terpolymer

http://www2.dupont.com/Plastics/en_US/pfo/assets/downloads/viton/Viton%20F-605C.pdf

Date added: January 12, 2014 - Views: 2

pdf
Standard Specification for Martensitic Stainless Steel Bars ...

1200°F [650°C]. For oxidation (scaling) resistance and at low stresses, these steels are useful to 1450°F [790°C]. 1.3 This specification is expressed in both inch-pound units and SI ... ASTM International takes no position respecting the validity of any patent rights asserted in connection ...

http://web.askewindustrial.com/ASTM/A565A565M.pdf?tblASTMSpecsPage=10

Date added: April 25, 2014 - Views: 1

pdf
MULE-HIDE SA-APP CAP SHEET PRODUCT DESCRIPTION

MULE-HIDE SA-APP CAP SHEET ... Beloit, WI 53511-1057 Form # PDS 09-1450 800/786-1492 Page 1 of 2 Date 02 ... (granular) / ASTM D-1970. BASIC USES SA-APP Cap Sheet membranes are specially designed for applications where the use of hot asphalt, cold process adhesive, or a propane torch is ...

http://www.mulehide.com/Files/Documents/09-1450_SA-APP_Cap_Feb_2010.pdf

Date added: September 12, 2013 - Views: 1

pdf
Compressed Sheet Gasket Materials - Target Marketing

entire VICTOR REINZ range of innova- ... Tensile strength, transverse ASTM F 152 Creep relaxation (1/32") ASTM F 38 B Sealability (1/32") ... 480°F / 250°C 750°F / 400°C 1450 psi / 100 bar 0.016in - 0.125in, 1/64" - 1/8" > 1160 psi / > 8N/mm2 2) 2)

http://target-marketing.us/pdf/victorreinzcat03.pdf

Date added: December 27, 2011 - Views: 10

pdf
GF Piping Systems > worldwide at home - IAPD :: International ...

Georg Fischer Central Plastics Sudamérica S.R.L. Buenos Aires, Argentina ... Phone +82 31 8017 1450 Fax +82 31 8017 1454 [email protected] www.georgfischer.kr ... Tensile Strength @ yield 7260 psi @73°F ASTM D638 Tensile Modulus 392,000 psi ASTM D638

http://www.iapd.org/dwp_test/pdf/gf_harvel-piping-systems.pdf

Date added: February 14, 2013 - Views: 10

pdf
I. PHYSICAL & MECHANICAL PROPERTIES Property Test Method Rating

Modulus of Rupture (f) ASTM D4761 1450 psi 250 psi Modulus of Elasticity (f) ASTM D4761 155,000 psi 100,000 psi Thermal Conductivity ASTM C177 1.5 BTU-in/hr-ft @85°F Leachate (i) TCLP-EPA 1311 Pass Notes: (a) Corresponding Smoke Developed Index ...

http://www.plasticlumberdepot.com/deck-spec.pdf

Date added: April 27, 2012 - Views: 8

pdf
Fluorosint® HPV Mica-filled PTFE - Professional Plastics

10.0 MPa 1450 psi ASTM D638 Elongation at Break 90.0 % 90.0 % ASTM D638 ... 82.2 °C 180 °F ASTM D648 Flammability, UL94 V-0 V-0 1/8 inch (Estimated Rating) Chemical Resistance Properties Metric English Comments Acids, Strong (pH 1-

http://www.professionalplastics.com/professionalplastics/FluorosintHPV-Data.pdf

Date added: December 24, 2012 - Views: 2

pdf
HiPrene - GS Caltext Czech s.r.o. -

f ASTM D790 MPa 1450 Impact Symbol Test Method Unit Value IZOD Impact Strength @ 23°C a iN23°C ASTM D256 kJ/m2 8 Hardness Symbol Test Method Unit Value Rockwell Hardness (R -Scale) HR R ASTM D785 95 Thermal Symbol Test Method Unit Value Temperature of Deflection under Load (HDT) T f

http://www.gscaltex-czech.com/publicfiles/files/downloads/14/Material%20Datasheet_M570_ASTM.pdf

Date added: June 2, 2014 - Views: 1

pdf
Uni-Flange Series 1450 Wedge Action Restrainer

Uni-Flange® Series 1450 Wedge Action Restrainer for Push-On Joints of Ductile Iron Pipe ... Series 1450 wedge action restrainer installed on spigot with lip facing the spigot end of pipe. ASTM A536, AWWA C111. Coated black. High strength, low alloy connecting rods and nuts. AWWA C111

http://www.fordmeterbox.com/pages/flippingbook/files/assets/downloads/page0038.pdf

Date added: March 9, 2014 - Views: 1

pdf
PRESSURE TEMPERATURE RATINGS GUIDE - DeZURIK

Carbon Steel - ASTM A216, Grade WCB Standard DeZURIK Material STANDARD CLASS VALVES, FLANGED & BUTT WELD END Temperature °F Pressure psi ANSI Class

http://www.dezurik.com/files/7313/6734/3263/pressure-temperature-ratings-guide-60.00-3.pdf

Date added: June 5, 2013 - Views: 13