Astm D4318 docs

Searching:
Download
Astm D4318 - Fast Download

Download Astm D4318 from our fatest mirror

ASTM STANDARDS REFERENCED IN THE NRC REGULATORY GUIDES

6225 dl's @ 6625 KB/s

doc
ASTM STANDARDS REFERENCED IN THE NRC REGULATORY GUIDES

D4318 Standard Test Methods for Liquid Limit, Plastic Limit, ... E1018 Standard Guide for Application of ASTM Evaluated Cross Section Data File, Matrix E 706 (IIB)

http://www.astm.org/portals/files/NRC_REGULATORY_GUIDES.doc

Date added: September 10, 2012 - Views: 201

doc
Sec 6.1: Cement Stabilized Sand Backfill - Welcome to the ...

CEMENT STABILIZED SAND BACKFILL. NOVEMBER 2000. Part 1: General. ... ASTM D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils.

http://www.dallascityhall.com/dwu/word/6.1_CementStabilizedSandBackfill.doc

Date added: February 23, 2015 - Views: 1

doc
SPECIFICATIONS - Stone Strong Systems

D. ASTM D4318 - Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils (AASHTO T89 & T90)

http://www.stonestrong.com/downloads/specifications-11-5-13.doc

Date added: December 11, 2013 - Views: 26

doc
Instructions for Testing and Reporting

Liquid Limit of Soils T89-10 or D4318-10: ... AASHTO T92 Shrinkage Factors of Soils (using mercury) and ASTM D4943 Shrinkage Factors of Soils by the Wax Method.

http://www.amrl.net/amrlsitefinity/publicdocs/pspdatasheets/SOIL%20INSTRUCTIONS%20167-168.doc

Date added: May 3, 2013 - Views: 21

doc
Instructions for Testing and Reporting - AMRL - The AASHTO ...

All tests should be conducted on each of the two samples according to the AASHTO or ASTM methods indicated. ... Plastic Limit of Soils T90-00 or D4318-10: ...

http://www.amrl.net/AmrlSitefinity/publicdocs/pspdatasheets/SOIL%20INST%20165-166.doc

Date added: April 26, 2012 - Views: 31

doc
SECTION 16130 - American Water Corporate

Material passing number 40 sieve shall meet the following requirements when tested in accordance with ASTM D4318: Plasticity index: not exceeding 7.

http://www.amwater.com/files/31%2023%2023%20-%20Utility%20Backfill%20Materials.doc

Date added: July 25, 2013 - Views: 45

doc
PROJECT MANUAL - United States Department of Veterans Affairs

ASTM D4318 Test Method for Liquid Limit, ... (ASTM D1556), Sand Cone Method; or AASHTO T238 (ASTM D2922) and AASHTO T239 (ASTM D3017), Nuclear Densometer Methods.

https://www.vendorportal.ecms.va.gov/FBODocumentServer/DocumentServer.aspx?DocumentId=228298&FileName=VA-259-11-RP-0190-501.DOCX

Date added: February 11, 2012 - Views: 50

doc
03/2002 - Oneonta Block Company - Manufacturer and ...

ASTM D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils. ... 03/2002 Author: smande Last modified by: Lael Created Date:

http://www.oneontablock.com/DPROSPEC.doc

Date added: April 12, 2012 - Views: 11

doc
03/2002 - Pavers - Patios | Hardscaping | EP Henry - EP Henry

ASTM D4318 Standard Test Methods for Liquid Limit, ... "EP Henry’s Coventry Wall Plus Retaining Wall Units and caps" as manufactured by EP Henry Corporation or its ...

http://www.ephenry.com/download-file.ashx?url=%2fmedia%2fhow-tos%2fCoventry+Wall+Plus+Specification.doc

Date added: May 4, 2013 - Views: 35

doc
www.mass.gov

780 CMR 16.00 is unique to Massachusetts. . . 1604.10 Snow, Wind, and Earthquake Design. ... ASTM D4318-93. w is the moisture content in percent, ASTM. D2216-92.

http://www.mass.gov/eopss/docs/dps/inf/code-change-1600-wind-snow-seismic-loads.doc

Date added: April 24, 2012 - Views: 13

doc
CONLOCK II CELLULAR INTERLOCKING CONCRETE GRID

ASTM D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of. Soils. ASTM D4491 Standard Test Method for Water Permeability of ...

http://www.nicolock.com/products/walls/wall-systems/trinity/item/download/77

Date added: July 10, 2013 - Views: 22

doc
To apply for A2LA accreditation under the geotechnical field ...

ASTM D4318 Liquid Limit, Plastic Limits and Plasticity Index of Soils. ASTM D4643 Determination of Water (Moisture) Content of Soil by the Microwave Oven Method.

http://www.a2la.org/selectionlists/Geotechnical_Selection_List.DOC

Date added: May 12, 2012 - Views: 42

doc
ORDINANCE NO - Welcome to Chattanooga.gov

ORDINANCE NO. 11882. AN ORDINANCE TO AMEND CHATTANOOGA CITY CODE, PART II, ... ASTM D4318) and standard Proctor moisture-density relationship (ASTM D698).

http://www.chattanooga.gov/city-council-files/OrdinancesAndResolutions/Ordinances/Ordinances%202006/11882%20City%20Code%20Secs%2032-271%20thru%20288%20-%20street%20construction%20standards.doc

Date added: September 17, 2014 - Views: 10

doc
excavtg, backflg & compctng for struct - FSD Home

Plastic Index shall be not more than 30 per ASTM D4318, Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils. 2.

http://www.laschools.org/fcs/cc/lausd-bidding/download/specifications_-_divisions_02_-_16/specifications_-_division_02/02320_ExcavatingBackfillingandCompactingforSyntheticTurfFields(08-04-07).doc?version_id=5494265

Date added: February 2, 2013 - Views: 22

doc
Precast Modular Block Retaining Wall Specification

Precast Modular Block Retaining Wall Specification. ... ASTM D4318 – Standard Test Method for Liquid Limit, Plastic Limit, and Plasticity Index of Soils.

http://www.redi-rock.com/documents/PMBguide/PMB_Guide_Specification_080113.doc

Date added: August 17, 2013 - Views: 61

doc
03/2002 - Oneonta Block Company - Manufacturer and ...

ASTM D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils [Last Update: 00] 12. ASTM D4595 Standard Test Method for Tensile ...

http://www.oneontablock.com/dphotos/dspec.doc

Date added: October 26, 2013 - Views: 6

doc
ALPHA-OMEGA GEOTECH, INC

Atterberg limits (ASTM D4318) Consolidated-Undrained with Pore Pressures (ASTM D4767) Sieve analyses (ASTM D422) Unconsolidated-Undrained (ASTM D2850)

http://www.aogeotech.com/downloads/servicecapabilities.doc

Date added: September 19, 2011 - Views: 110

doc
1 - ACEC Indiana

ASTM D4318: Liquid Limit, Plastic Limit and Plasticity Index of Soils (Atterberg Limits) ASTM D5434: Field Logging of Subsurface Explorations of Soil and Rock.

http://www.acecindiana.org/content/PDF/2009-2010/Standard%20Specs%20Division%202/StandardSpecs02460InstrumentationandMonitoring.doc

Date added: January 8, 2015 - Views: 1

doc
CHAPTER 31F - California State Lands Commission

3.The plasticity index, PI, and the moisture content shall be determined in accordance with ASTM D4318 [6.1] and ASTM D2216 [6.2], respectively. (see Table 31F- 6-1).

http://www.slc.ca.gov/Division_Pages/MFD/MOTEMS/Section3106F.doc

Date added: January 27, 2012 - Views: 24

doc
Geotechnical Guidelines Word Document - Division of Water ...

Geotechnical exploration is necessary to obtain information to assess the stability of the dam. ... (ASTM D4318) 2 per distinct soil unit. Use for soil classification.

http://water.ky.gov/damsafety/Documents/WRGeotech_Guidelines.doc

Date added: February 5, 2012 - Views: 36

doc
ATB02704 - Aggregates and Granular Materials - ftp.nirb.ca - /

aggregate produced PLASTICITY INDEX ASTM D4318 One per source LIQUID LIMIT ASTM D4318 One per source Note 1: The ...

http://ftp.nirb.ca/01-SCREENINGS/COMPLETED%20SCREENINGS/2005/05UN121-Nunavut%20Airports%20Division%20-%20Iqaluit/01-APPLICATION/060307-05UN121-GN-EBA%20Specifications-ITAE/EBA02704.doc

Date added: November 25, 2013 - Views: 15

doc
SECTION 02276

ASTM D4218 Carbon Black Content. 9. ASTM D4318 Liquid Limit, Plastic Limit and Plasticity Index of Soils. 10. ASTM D4475 Horizontal Shear Strength of Pultruded ...

http://www.mrkeystone.net/Folletos/Specifications/KeySpecs/Generic/DOC/6in%20Multi%20SRW%20Generic.doc

Date added: September 29, 2014 - Views: 1

doc
bid

Plasticity Test ASTM D4318 Each Sieve Analysis ASTM C117 and C136 Each Portland Cement Concrete Slump KT-12 ...

http://ppm.opkansas.org/wiki/images/IV-2d.dot

Date added: August 17, 2013 - Views: 5

doc
CONSTRUCTION MATERIALS FIELD OF TESTING

D4318* Liquid Limit, ... ASTM E273 Ultrasonic Examination of Longitudinal Welded Pipe & Tubing. ASTM E494 Measuring Ultrasonic Velocity in Materials

http://xa.yimg.com/kq/groups/23711357/461503449/name/ASTM

Date added: May 2, 2013 - Views: 107

doc
ELECTROCHEMICAL PRESSURE INJECTION - Hayward Baker ...

ASTM D698 Standard Proctor. ASTM D2216 Moisture Content. ASTM D4318 Atterberg Limits. ASTM D4546 Method ‘B’ Swell. 1.4 DEFINITIONS. A. Electrochemical Injection.

http://www.haywardbaker.com/WhatWeDo/Techniques/GroundImprovement/InjectionSystems/Specifications/Downloads_GetFile.aspx?id=3083

Date added: November 2, 2014 - Views: 1

doc
www.belgarddesignpro.com

ASTM D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils. ASTM D4491 Standard Test Method for Water Permeability of Geotextiles ...

http://www.belgarddesignpro.com/docs/BARWTech.doc

Date added: May 23, 2013 - Views: 60

doc
CONLOCK II CELLULAR INTERLOCKING CONCRETE GRID

ASTM D4318 Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils. ASTM D4491 Standard Test Method for Water Permeability of Geotextiles ...

http://www.nesl.com/images/images9021/tech%20specs/Eng%20Wall-%20CSI%20Specs.doc

Date added: February 16, 2012 - Views: 7

doc
Keystone Compac.WORD - York Building Products

ASTM D4318 Liquid Limit, ... previously constructed projects of similar size and magnitude by the wall installer where the Keystone retaining wall system has been ...

http://www.yorkbuilding.com/wp-content/uploads/Century-Wall-Specs1.doc

Date added: October 13, 2013 - Views: 4

doc
Granular Sub Base - Department of Transportation and Works

ASTM D4318, Standard Test Methods for Liquid Unit, ... Finished sub base surface to be within 10 mm of elevation as indicated but not uniformly high or low.

http://www.tw.gov.nl.ca/works/masterspec/32111601.doc

Date added: October 3, 2011 - Views: 48

doc
31 00 05

ASTM D4318, Test Method for Liquid Limit, Plastic Limit and Plasticity Index of Soils. Indiana Department of Transportation (INDOT) - Standard Specifications:

http://www.cityoffortwayne.org/utilities/images/stories/designman/Master_Specs/31_00_05-_Trenching_and_Earthwork.docx

Date added: January 13, 2015 - Views: 1

doc
Õðïõñãåßï ÁíÜðôõîçò

ASTM D2216 : 05 Soil . Soil(con.) Standard Test Methods for Liquid Limit, ... ASTM D4318 : 05 Standard Test Method for Particle-Size Analysis of Soils.

http://www.esyd.gr/eped/1.19700_en.doc

Date added: February 23, 2015 - Views: 1

doc
GUIDE SECTION 02200; ALTERNATIVE 2 (For sewer and pipeline ...

The plasticity index of the material, as determined in accordance with ASTM D4318, shall not exceed 12. The material may be an imported quarry waste, ...

http://virtual.cocef.org/Discos_documentos_consultores/Disco_372/02200_A2.doc

Date added: April 2, 2014 - Views: 2

doc
www.soilretention.com

10. ASTM C 140 Std. Spec. for Sampling and Testing Concrete Masonry Units. 11. ... Plasticity Index (PI) < 20 and Liquid Limit < 40 per ASTM D4318. B.

http://www.soilretention.com/downloads/VERDURA-SPEC.doc

Date added: November 3, 2011 - Views: 20

doc
Excavating, Trenching and Backfilling - Department of ...

ASTM D4318, Standard Test Methods for Liquid Limit, ... Excavation classes: two classes of excavation will be recognized; common excavation and rock excavation.

http://www.tw.gov.nl.ca/works/masterspec/31233301.doc

Date added: October 16, 2011 - Views: 25

doc
Microsoft Word - RECAP 2003 FAQs Jan 01.doc

RECAP states that MO-1 and MO-2 cannot be used if impacted groundwater discharges to surface water because ... PL, PI) (ASTM D4318) . • Particle Size ...

http://www.deq.louisiana.gov/portal/Portals/0/RemediationServices/RPform_5340.doc

Date added: November 6, 2012 - Views: 35

doc
Scope - Home - My Committees

PI Plasticity index, ASTM D4318-93. PAB Anchor design load, N (lbf) ... Ni = the Standard Penetration Resistance determined in accordance with ASTM D 1586, ...

http://mycommittees.api.org/standards/cre/scast/Meeting%20Materials/spring05/ballot16-05-650-598.doc

Date added: October 23, 2013 - Views: 20

doc
1 - Missouri Department of Natural Resources

former St. Louis Ordnance Plant (SLOP) St. Louis, Missouri. ... (ASTM D422) Atterburg Limits (ASTM D4318) Total Organic Carbon ( ASTM D2974) Soil pH (USEPA Method 9045C)

http://www.dnr.mo.gov/env/hwp/news/riwp-slop-final-01-2005.doc

Date added: October 22, 2011 - Views: 41

doc
www.spexplus.net

ASTM International (ASTM) (www.astm.org): ... D4318 - Standard Test Methods for Liquid Limit, Plastic Limit, and Plasticity Index of Soils. SYSTEM DESCRIPTION.

http://www.spexplus.net/dl/doc/31-2300.docx

Date added: March 31, 2014 - Views: 5

doc
REQUEST FOR PROPOSALS - DGS Home

Atterberg limits ASTM D4318. Shrinkage factors of soils ASTM D427. Natural density and moisture content AASHTO T233. Aggregate sieve analysis ASTM C136. ...

http://dgs.virginia.gov/LinkClick.aspx?fileticket=S71MNcbHMxY%3d&tabid=717

Date added: May 14, 2013 - Views: 34

doc
Keystone Compac.WORD

ASTM D4318-05 Liquid Limit, Plastic Limit and Plasticity Index of Soils. ASTM C881/C1881M-02 Standard Specification for Epoxy-Resin-Base Bonding Systems for Concrete.

http://www.permacon.ca/uimages/tech_files/WALLS_Model%20Specifications_QUEBEC_May%202010.doc

Date added: October 24, 2013 - Views: 1

doc
TABLE OF CONTENTS - Ohio EPA Home

TGM Chapter 10: Sampling10-2October 2011. ... ASTM, Standard D4318-10. Standard Test Method for Liquid Limit, Plastic Limit, and Plasticity Index for Soils.

http://www.epa.state.oh.us/portals/28/documents/TGM-03_draft2012.docx

Date added: September 13, 2012 - Views: 51

doc
www.lwua.gov.ph

Sieve Analysis per ASTM D422 2. Atterberg Limit per ASTM D4318 3. Natural Moisture Content per ASTM D2216 4. Soil Classification per ASTM D2487. 1.02 LOCATION OF THE ...

http://www.lwua.gov.ph/bids_10/Request%20for%20Quotation%20Geotechnical%20%20Investigatioan%20May%2014%20Final.doc

Date added: November 3, 2012 - Views: 5

doc
www.acisocal.org

T89 / D4318 Determining the Liquid Limits of Soils. ... Experience and knowledge of concrete testing of the previously mentioned ASTM/AASHTO procedures is highly ...

http://www.acisocal.org/app/download/7236903689/AGG+BASE+Flyer+2014.doc

Date added: January 4, 2014 - Views: 5

doc
CHAPTER 31F [FOR SLC] - California State Lands Commission

3.The plasticity index, PI, and the moisture content shall be determined in accordance with ASTM D4318 [6.1] and ASTM D2216 [6.2], respectively.

http://www.slc.ca.gov/Division_Pages/MFD/MOTEMS/CHAPTER%2031F%20MOTEMS.doc

Date added: October 30, 2011 - Views: 142

doc
STATE OF MICHIGAN

FLOOD CONTROL DEVICES ENGINEERING DESIGN STANDARDS ORDINANCE. Ord. No. 208; Date of Adoption: September 11, 2007. An Ordinance to establish design specifications ...

http://www.frenchtowntownship.org/admin/files/general%20ordinances/FCT.ordinance.208.doc

Date added: March 2, 2015 - Views: 1

doc
Material List.wpd - Outagamie County

class III gasket pipe ASTM C76/ft. : 12" 13.00 . 15" 16.00. 18" 21.00. 21" 24.00. 24" 29.00. 27" 32.00. 30" 42.00. 36" 62.00. corrugated ...

http://www.outagamie.org/Modules/ShowDocument.aspx?documentid=8361

Date added: January 25, 2015 - Views: 1

doc
SECTION 1 - TABLE OF CONTENTS - Civil Engineering Blog ...

Liquid Limit and Plastic Limit - AASHTO T 90 (ASTM D4318) Direct Shear Test - AASHTO T 238 (ASTM D 3080) Unconfined Compression Test - AASHTO T 208 (ASTM D 2166)

https://iphala.files.wordpress.com/2011/01/chaper-2-page-1-75.doc

Date added: January 28, 2015 - Views: 1

doc
Keystone Compac.WORD

ASTM D4101-05a Standard Specification for Polypropylene Injection and Extrusion Materials. ASTM D4318 Liquid Limit, Plastic Limit and Plasticity Index of Soils.

http://www.permacon.ca/uimages/tech_files/Word_Version1147986429.doc

Date added: June 4, 2013 - Views: 4

doc
LOUISIANA MOTOR FUELS - Louisiana Department of Environmental ...

... 10 of the Louisiana Motor Fuels ... (ASTM D2974) $40.00 Unified Soil Classification System (ASTM D2487) $40.00. Atterberg Limits (LL, PL, PI) (ASTM D4318) $50 ...

http://www.deq.louisiana.gov/portal/LinkClick.aspx?link=financial%2fFINAL+January1++2006+Guidance+Document.doc

Date added: August 26, 2014 - Views: 2